Installing The Fingerprint Scanner Bracket - Toshiba Satellite A665 Series Maintenance Manual

4 Replacement Procedures

Installing the Fingerprint Scanner Bracket

Install the fingerprint scanner bracket according to the following procedures.
1. Turn the logic upper assembly upside down.
2. Use your fingers to press and hold down the wings on either side of the fingerprint
scanner bracket as shown in Figure 4.22.
3. Place the bottom edge of the fingerprint scanner bracket in the proper position.
4. Lower the top edge of the fingerprint scanner bracket and press down until it snaps into
place.
Satellite A660/A665/A660D Maintenance Manual
4.11 Fingerprint Scanner Bracket
4-34