4 Replacement Procedures
6. Pry up the logic upper assembly by the back edge and then lift it from the laptop, as
shown in Figure 4.18.
Installing the Logic Upper Assembly
Install the logic upper assembly according to the following procedures.
1. Seat the logic upper assembly on the laptop and adjust to the correct position.
2. Press down the logic upper assembly, starting from the top edge and toward the bottom
edge. Make sure that the hooks on the back of the assembly are securely in place.
3. Connect the speakers cables, CAP sensor FFC, light bar FFC and touchpad FFC to the
motherboard.
Satellite M600/M640/M645/M647 Maintenance Manual
Downloaded from LpManual.com Manuals
1
Figure 4.18 Removing the logic upper assembly from the laptop
4.9 Logic Upper Assembly
1
2
2
4-30