2Troubleshooting Procedures
2.29 JET Troubleshooting
Figure 2-28 JET troubleshooting process
The JET antenna wire, JET module or system board may be the reason of a JET fault. Any of
these components may be damaged. To determine if the computer's JET is functioning
properly, perform the following procedures. Figure 2-23 outlines the process. Start with
Satellite A660/A665 Series Maintenance Manual
START
Perform JET test
(Procedure 1)
Was a JET problem detect?
Perform connector and
replacement check
(Procedure 2)
Replace JET antenna
moudle.
Replace system board
END
JET is not faulty. Continue
troubleshooting-refer to Figure
2-1
68