AudioCodes Mediant 1000B Quick Setup Manual page 5

Gateway & e-sbc

Hide thumbs Also See for Mediant 1000B:

Assigning an IP Address to the Device

Use the device's factory default IP address (192.168.0.2/24 and Default Gateway 0.0.0.0) to initially access the

device's Web-based management interface and then change it to suit your networking addressing scheme for

subsequent connectivity.

Using a CAT-5e/6 straight-through RJ-45 Ethernet cable, connect the device's Ethernet port GE 0/1 or

0/2 (front panel) to the LAN port of your computer.

Change the IP settings of your computer to correspond with the device's default IP address and subnet

mask.

On your computer, open a standard Web browser (for example, Google Chrome), and then in the URL

field, enter the device's default IP address; the Web Login screen appears:

Type in the default username (Admin) and password (Admin), and then click Log In.

Open the IP Interfaces table (Setup menu > IP Network tab > Core Entities folder > IP Interfaces).

5 |

P a g e

Table of Contents