Advertisement
e Type an unused IP address and the values of your subnet mask. Click OK. (To obtain an unused IP address, see Chapter 6,
"DHCP Server Configuration" in the Reference Manual .)
Setting Up Web Point on Your Dynamic Network
If you need a browser on any of the computers on the network, you can install Netscape Communicator from the EasyStart CD . You
will then use the browser to set up Web Point on the dynamic network.
Open your browser and type
in the URL line. The Web Point "Home" page opens.
To complete setting up Web Point, click Internet Express, and type the appropriate information. (See steps 7 and 8 in "Setting Up a
New Network.")
Note : In order to use your DHCP server, you must disable Web Point's DHCP server. For more information, see "Setting Up an Existing
DHCP Server" in the Reference Manual .
Advertisement
