Advertisement
Setting Up a Network Interface Card Manually
If EasyStart is open, close it.
1
From the Desktop, click Start, Settings, Control Panel.
2
Double-click Network.
3
Click Configure. Verify that your Ethernet card and TCP/IP are installed by seeing if the Ethernet driver and TCP/IP are visible.
4
To verify if IP address is present:
5
Double-click on TCP/IP.
•
•
In the "IP address" screen, the setting should be set to Obtain IP address Automatically.
If TCP/IP is not present, follow these steps:
•
In Configuration, click Add.
Click Protocol.
•
Click Microsoft TCP/IP.
•
In the "IP address" screen, the setting should be set to Obtain IP address Automatically.
•
6
After the setup is complete, open your browser and type
install NetscapeCommunicator from the EasyStart CD .)
When the Web Point "Home" screen opens, click Internet Express.
7
Type in all appropriate information for Internet Service Provider.
8
Click Next.
9
If your ISP requires a Login Script, click Yes.
in the URL line. (If you do not have a browser, you can
Advertisement
