Advertisement
Connecting Web Point to a Network Hub
Follow these steps to connect Web Point through either a network Hub or the Home Network Connection Center.
Using an Ethernet cable, connect Ethernet Port 1 on Web Point to a spare port either on the existing network's hub or the Home
1
Connection Center Computer Network Module.
For each of the remaining computers on your network, follow the steps listed in "Setting a Computer's Gateway and DNS Server
2
Addresses."
If the other computers on your network need a browser, install Netscape Communicator from the EasyStart CD .
3
Test the connection by opening your browser and entering any known URL.
4
Trademarks
The following terms are trademarks or registered trademarks of the IBM Corporation in the United States or other countries or both:
•
IBM
•
Home Director
Other company, product, and service names may be trademarks or service marks of others. Microsoft, Windows, Windows 95, Windows 98, and the Windows NT logo
are trademarks or registered trademarks of Microsoft Corporation. Macintosh and AppleTalk are registered trademarks of Apple Corporation. EasyStart is a registered
trademark of Ramp Networks, Inc. IPX is a registered trademark of Novell, Inc.
Advertisement
