Door Removal; Electronic Control - Frigidaire FPFU19F8RF Use & Care Manual

DOOR REMOVAL

If door must be removed:
• Unplug the unit or switch the breaker that
supplies power to the unit to the
off position.
• Remove the plastic top hinge cover.
• Hold the door in place while removing the
top hinge from the cabinet.
• Remove the two 3/8" hex head bolts
from the top hinge with a 3/8" wrench or
socket.
• Lift the door upwards and pull up and away
from the cabinet until free of the bottom
hinge pin mounted on the front of the
cabinet.
• To replace the door, reverse the above
procedures and securely tighten all
screws to prevent hinge slippage.

ELECTRONIC CONTROL

Setting the PRO-SELECT™ Electronic Control
Cool Down Period
For safe food storage, allow 4 hours for the appliance to cool down completely. The unit will run
continuously for the first several hours.
Pro-Select™ Electronic Control
The Pro-Select™ Electronic Control is located inside the appliance. Temperature is factory
preset to provide satisfactory food storage temperatures. However, the temperature control is
adjustable to provide a range of temperatures for your personal satisfaction.
To adjust the temperature setting, press the UP () key for warmer temperature and DOWN
() key for colder temperature on the control panel. Allow several hours for the temperature
to stabilize between adjustments. The unit can be adjusted between -10°F (-23°C) and 10°F
(-12°C). By pressing the TEMP MODE key, the temperature display will toggle between °F and °C.
8
CAUTION
Doors are heavy. Two people are
recommended to remove or replace the door
assembly from the cabinet.
°F
Hinge Cover
Hinge Bolts (2)
Hinge Plate