Advertisement
Quick Links
Installation and Assembly:
Shelf Accessory for the Corner Mount
Models: ACC324(-S)
Features
• For use with CM50(-S), CM60(-S) or CM850(-S)
• Top mounting provides open access to A/V equipment
• Creates enclosed compartment when mounted at the
bottom of corner mount
• 25 lb weight load capacity
• Available in black or silver
Before you begin, make sure all parts shown are included with your product.
Parts may appear slightly different than illustrated.
Parts List
Description
A
shelf
1/4-20 x 1" round head phillips screw
B
1/4-20 serrated flanged locknut
C
D
1/4" flat washer
Visit the Peerless Web Site at www.peerlessmounts.com
A
Black
Qty.
Part #
1
120-1079
4
510-9110
4
530-1021
4
540-9440
C
B
1 of 3
Silver
Part #
120-4079
510-9110
530-1021
540-9440
D
ISSUED: 08-25-08 SHEET #: 120-9056-1
For customer care call 1-800-865-2112 or 708-865-8870.
Advertisement
Related Manuals for PEERLESS ACC324
Summary of Contents for PEERLESS ACC324
- Page 1 Description Qty. Part # Part # shelf 120-1079 120-4079 1/4-20 x 1" round head phillips screw 510-9110 510-9110 1/4-20 serrated flanged locknut 530-1021 530-1021 1/4" flat washer 540-9440 540-9440 1 of 3 ISSUED: 08-25-08 SHEET #: 120-9056-1 For customer care call 1-800-865-2112 or 708-865-8870. Visit the Peerless Web Site at www.peerlessmounts.com...
- Page 2 Attaching Shelf to Inside Bottom of Corner Mount Center shelf (A) onto corner mount and align with front hole slots. Replace screw, washer and nut combination to front and rear hole slots as shown. NOTE: When reattaching support bracket, be sure flange faces downward and slot faces front. NOTE: When wall plates of corner mount are 20" from the corner of the wall, fasten one 1/4-20 x 1" round phillips head screw (B) one 1/4" flat washer (D) and one 1/4-20 flanged serrated locknut (C) through slot of support bracket as shown below. Round phIllIpS heAd SCReW FlAT WASheR SloT FlAnged SeRRATed loCknuT FlAnge BACK VIEW 2 of 3 ISSUED: 08-25-08 SHEET #: 120-9056-1 For customer care call 1-800-865-2112 or 708-865-8870. Visit the Peerless Web Site at www.peerlessmounts.com...
- Page 3 Attaching Shelf to Top of Corner Mount Center shelf (A) onto corner mount and align with front hole slots. Replace screw, washer and nut combination to front and rear hole slots as shown. NOTE: When reattaching support bracket, be sure flange faces downward. NOTE: When wall plates of corner mount are 20" from the corner of the wall, fasten two 1/4-20 x 1" round phillips head screw (B), two 1/4" flat washers (D), and two 1/4-20 flanged serrated locknuts (C) through slot of support bracket and center plate on both sides as shown below. Round phIllIpS heAd SCReW FlAT WASheR FlAnged SeRRATed loCknuT FRONT VIEW 3 of 3 ISSUED: 08-25-08 SHEET #: 120-9056-1 For customer care call 1-800-865-2112 or 708-865-8870. Visit the Peerless Web Site at www.peerlessmounts.com © 2008, peerless Industries, Inc. All rights reserved. All other brand and product names are trademarks or registered trademarks of their respective owners.