Alarm Setting; Advance Setting; Device Name Setting; Local Recording Path - Tenda HD series User Manual

5.5. Alarm setting

5.5.1. Alarm setting
If user needs to monitor a fixed area, it will detect the motion and trigger the alarm when
there is any motion in the area. In the motion detect sensibility, the smaller the value, the more
sensitivity.
After triggering the alarm, you can adopt several alarm mode in armed time.

Link to the Preset when alarming: need to set preset point of the camera;

Send alarm info by email ( one email include a picture); every alarm trigger a email;

Send the snap to the FTP server, user can also set the interval time between two pictures.
The device only triggers alarming when it detects any motion in armed time. User can set
schedule time to be "all the time", also assign the armed time. Before you set "Time Schedule",
please go to "Device Date and Time settings" to set the correct time for the item.

5.6. Advance setting

5.6.1. Device name setting

The user can name the camera, example for home, office etc.

5.6.2. Local recording path

The camera will be automatically create a file folder named "Record files" in root directory
of disk C:\,when the user don‟t set "local recording path" and launch recording directly, and then
save recording file to the folder.
www.tenda.cn