4.4. Network setting
4.4.1. LAN settings
You can choose one of the way to change the IP address of the camera.
Method One: Set IP address of the camera automatically by select "Dynamic IP Address "in" IP
Configuration Type" item. Note,this need your Router‟s DHCP Server function on.
Method Two:Set IP address of the camera manually by select "Fixed IP Address "in" IP
Configuration Type" item. You can refer to 《Quick Installation Guide》 step 4 "Configure Camera"
Sub-step3 "Set IP address of the camera" for detail.
The default HTTP port is 80, if you do not modify the port, you can directly enter the
camera IP in the web address field; if you change the port, you need to add
number benind the IP address.
address is 192.168.0.10. You must enter 192.168.0.10:8081 to access camera.
The cameras support RTSP protocol, if select "on" of "RTSP authority verification", you
need to enter user name and password when invoke video by RTSP protocol.
Note:
When you modify the parameters, you need to click Apply to save your settings.
4.4.2. WiFi setting
Login camera in wired connection and enter wifi setting, and then operate as the following
step.
For example: If you modify the port is 8081, the camera IP
www.tenda.cn
":" and port