Contour RollerMouse Free3 User Manual
Wireless
Hide thumbs
Also See for RollerMouse Free3:
- Product manual (15 pages) ,
- User manual (14 pages) ,
- User manual (10 pages)
Related Manuals for Contour RollerMouse Free3
Summary of Contents for Contour RollerMouse Free3
- Page 1 RollerMouse Free3 Wireless User Guide...
-
Page 2: Box Contents
Box Contents RollerMouse Free3 Two short keyboard risers Two long keyboard risers Wireless receiver USB 2.0 cable adapter Charging cable... - Page 3 RollerMouse Functions Rollerbar Cursor speed adjustment Copy Paste Back Forward Left-click Scroll wheel “One Touch” double-click For additional mouse features and specific Mac settings, please download our driver at www.contourdesign.com/UK...
- Page 4 Keyboard Positioning Before plugging in the unit, take a moment to check the height and angle of your keyboard, and find the arrangement that’s most comfortable for you. Use the risers to achieve the correct angle and height regardless of the type of keyboard you are using.
- Page 5 Inserting the Keyboard Risers Fit the end of the riser into the slot on the back of the Line up the grooves of the short and RollerMouse Free3. long risers then press the two parts together until you hear them...
-
Page 6: Power Switch
Connecting to a computer The power switch can be found on the underside of the mouse. Make sure the Plug the wireless receiver or the RollerMouse Free3 power switch is on before pairing with your computer. charging cable into the computer’s USB port. Allow your computer a few seconds to automatically install. - Page 7 Using the rollerbar Click Force Tension Adjustment The rollerbar provides two functions: Adjust the click force of the rollerbar by using the tension adjustment button located on the bottom right side of the mouse. Pressing down on the rollerbar performs a left click. Moving the rollerbar from side to side and up and down performs cursor movement.
- Page 8 Change cursor speed Press the Cursor Speed button to cycle through cursor speeds. There are ten speed selections which range from slow (600 DPI) to fast (2800 DPI). Speed can be identified by the LED lights as shown.
-
Page 9: User Settings
User settings Changing the ‘Double’ click button to ‘Middle’ button function Adjust the user settings to best fit your operating system. Use the following key commands to switch settings. Hold button combinations for two seconds until To change double click button to function as a middle click, hold LED lights flash to confirm. - Page 10 For more information please visit: For more information please visit: www.contourdesign.com www.contourdesign.com/UK Contour Design, Inc. 10 Industrial Drive Contour Design (UK) Ltd. Windham, New Hampshire 03087, USA Phone: (603) 893-4556 Email: ergoinfo@contourdesign.com Kingsbury House 468 Church Lane Contour Design Nordic A/S...