Do you have a question about the RollerMouse Red Wireless and is the answer not in the manual?
Questions and answers
Kathy Lakin
April 16, 2025
Copy and paste are not working
1 comments:
Mr. Anderson
May 8, 2025
Copy and paste issues with the Contour RollerMouse Red Wireless could be caused by a failed pairing between the keyboard and USB receiver. To resolve this, try re-pairing by first unplugging and plugging in the receiver, keeping the keyboard close during pairing, and avoiding USB hubs or docking stations. If pairing fails, hold the red FN button, type D-O-N-G-L-E, and press Enter while continuing to hold FN. Also, driver issues may cause problems, so uninstall and reinstall the Contour Design driver, ensuring the PC is restarted after each step.
This answer is automatically generated
Subscribe to Our Youtube Channel
Related Manuals for Contour RollerMouse Red Wireless
Page 2
Box Contents RollerMouse funktioner RollerMouse Red Wireless Rollerbar Two short keyboard risers Cursor speed / Battery level indicator (LED) Two long keyboard risers Copy Wrist rest Paste Wrist rest removal key Left-click Dongle (Wireless receiver) Right-click USB 2.0 cable adapter...
Page 3
Neutral Flat Adjusting Risers Line up the short and long risers then Negative Tilt Neutral Tilt press the two parts together until you hear them snap into place. Positive Tilt RollerMouse Red Wireless RollerMouse Red Wireless...
ON position. Turning off the device is only necessary for long-term storage • Pressing down on the rollerbar performs a left click. or during travel. • Moving the rollerbar from side to side and up and down performs cursor movement. RollerMouse Red Wireless RollerMouse Red Wireless...
Page 5
Release both buttons once the desired click force tension has been reached. Note: The rollerbar click function can be turned off using the above adjustment method, by moving the scroll wheel until all LEDs are lit. RollerMouse Red Wireless RollerMouse Red Wireless...
6 hours and you may use your RollerMouse Red as it charges. *Battery life may vary based on user and computing conditions. 1600 DPI 1800 DPI 2000 DPI 2400 DPI 2800 DPI RollerMouse Red Wireless RollerMouse Red Wireless...
An example of a situation where freeze click would be usefull is in a multi- monitor setup where the cursor has landed on the third monitor and the user wishes to center the rollerbar to better work that monitor. RollerMouse Red Wireless RollerMouse Red Wireless...
Page 8
RollerMouse and rest it in your hand. Fit the wrist rest removal into the slot at the end of the unit and twist the key. To install the wrist rest after removal, snap it nito the slot on the front edge of your RollerMouse Red. RollerMouse Red Wireless...
Need help?
Do you have a question about the RollerMouse Red Wireless and is the answer not in the manual?
Questions and answers
Copy and paste are not working
Copy and paste issues with the Contour RollerMouse Red Wireless could be caused by a failed pairing between the keyboard and USB receiver. To resolve this, try re-pairing by first unplugging and plugging in the receiver, keeping the keyboard close during pairing, and avoiding USB hubs or docking stations. If pairing fails, hold the red FN button, type D-O-N-G-L-E, and press Enter while continuing to hold FN. Also, driver issues may cause problems, so uninstall and reinstall the Contour Design driver, ensuring the PC is restarted after each step.
This answer is automatically generated