Socket Series 9 User Manual page 33

Microsoft Windows XP Service Pack 2:
Refer to the documentation for your Bluetooth hardware/software for
instructions on discovering and connecting to the CRS.
1. Turn on the Cordless Ring Scanner. Press the small power button on the
side of the wrist unit for at least 2 seconds, until you hear a beep. The
Bluetooth status LED on the wrist unit will start blinking blue.
2. Turn on the Bluetooth radio of your computer.
3. Use the Add Bluetooth Device Wizard to discover and connect to the
Cordless Ring Scanner. Click on the Bluetooth icon in the task tray. In
the pop-up menu, click Add a Bluetooth Device.
4. During the device discovery, the Cordless Ring Scanner will appear as
Socket CRS [xxxxxx]
The characters in brackets are the last 6 characters of the
scanner's Bluetooth MAC address.
5. In the passkey options screen, select the option Let me choose my own
passkey and enter a passkey of your choice.
6. To indicate the connection, the CRS will beep once.
7. In the last screen of the Add Bluetooth Device Wizard, note the COM
number of the Outgoing COM port.
CHAPTER 4: SETUP FOR WINDOWS XP 33