When using the devices in other countries, the relevant national regulations, standards and directives must be observed. Declaration of conformity The requirements of the European directive 94/9/EC are met. The product conforms with the European Directive (EMC) 89/336/EEC and its amendments and the Low-Voltage Directive 73/23/EEC. Position Transmitter TGS 40 (RAM) 42/14-50 EN...
• A sloping position of the actuator will impair - V (0 V) the measurement signal. • After removing the actuator the encoder will Fig. 2-1 Functional diagram deliver an arbitry measurement signal. 42/14-50 EN Position Transmitter TGS 40 (RAM)
Flange 2 plug with Pressure jack = 0 or 4 mA vertical ø34 ø34 vertical ø40 ø40 ø56 ø75 Looking towards the flange Pressure jack Pressure jack version HMN and DWR version SWR Position Transmitter TGS 40 (RAM) 42/14-50 EN...
* Increasing signal when turning clockwise with view on flange side. to DIN EN 60068-2-27 Resistance against vibra- 10 Hz...2000 Hz; 500 m/s tion to DIN EN 60068-2-6 Protection grades Front plate IP 68 Housing IP 64 42/14-50 EN Position Transmitter TGS 40 (RAM)