Philips FC6048/01 User Manual page 8

ENGLISH
8
7 Put the filter back in the holder and turn it clockwise.
8 Place the filter holder back into the dust compartment.
9 Reattach the dust compartment by aligning the slot on the dust compartment with the
projecting part of the appliance. First attach the bottom of the dust compartment and then
push the top of the dust compartment towards the appliance until it locks into place ('click')
(fig. 18).
Environment
To make recycling possible, the plastic parts used for this appliance have been coded.The cardboard
packaging has been made of recycled material and is fully recyclable.
Guarantee & service
If you need information or if you have a problem, please visit the Philips website at www.philips.com
or contact the Philips Customer Care Centre in your country (you will find its phone number in the
worldwide guarantee leaflet). If there is no Customer Care Centre in your country, turn to your
local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal
Care BV.
Troubleshooting
Problem
The vacuum cleaner does not
work.
The vacuum cleaner does not
vacuum properly.
Dust escapes from the vacuum
cleaner.
The vacuum cleaner does not
work properly when one or
more accessories (hose, tube,
brush tool or crevice tool) are
attached.
Solution
Make sure that you have inserted the plug properly into the wall socket.
Take the appliance to your dealer or a service centre authorised by Philips
for examination.
Make sure that you have attached the dust compartment properly to the
appliance.
Empty the dust compartment (see chapter 'Cleaning').
Check if the filter is clogged. If so, remove the filter holder and clean the filter
(see chapter 'Cleaning').
Check if the dust compartment is full. If so, empty it.
Make sure you have attached the dust compartment properly to the
appliance (see chapter 'Cleaning').
Make sure the filter holder has been inserted properly into the dust
compartment (see chapter 'Cleaning').
Check whether one of the accessories is clogged. If so, remove the
obstruction.
Check if the dust compartment is full. If so, empty it.
Check if the filter is clogged. If so, use a brush or a standard vacuum cleaner
to clean the filter.