(17) Turn on DCD-A100, and press the RESET button.
①Turn on DCD-2010AE.
(Check connection CY141 on 8U-310040.)
(18) I f the connection with the Flash Programmer is successfully made, a dialogue box saying "Erase All data in this
devise? (Y/N)" appears automatically. If the connection fails, error message will appear. (Ex.: E000)
Click Yes.
(19) Click A (Auto Programing) to start writing.
(20) Turn off DCD-A100.
(21) Remove the SPK-581 form DCD-A100.
CX708
31
PC
②Press the RESET button.