Denon DCD-A100 Service Manual page 12

HOW TO REPLACE TRAVERSE UNIT
Caution: The optical pickup can be damaged easily by static electricity charged on human body. Take necessary
anti-static measures when repairing around the optical pickup.
(Follow the procedure below in reverse order when reassembling.)
• The photograph is DCD-2010AE.
1. MECHA TOP PLATE GUIDE-CLAMP disassembly
(1) Remove 4 screws, then detach MECHA TOP PLATE.
(2) Remove 4 screws, then detach GUIDE-CLAMP.
2. Tray disassembly
(1) Push in the SLIDE CAM side underneath the MECHA front slowly securely. The Tray can now be pulled out.
(2) Pull out the tray, remove 5 screws of the tray rear. Remove the tray to direction of the arrow.
※ Check there is grease on the BELT LOAD. If there is grease on the BELT LOAD, wipe it off with alcohol.
MECHA TOP PLATE
12
GUIDE-CLAMP
BELT LOAD