3.2. Selecting the mode
・ The following modes are available.
Press the 8 or 9 button to select each mode and press the 1 / 3 button to set that mode.
Press the 2 button to return to the mode originally set when the test mode was entered.
(1) FL tube lighting mode
(2) Tray open/close mode
(3) Laser on/off (CD/DVD) mode
(4) Servo adjustment value display mode
(5) Trace mode (error rate display)
(6) Servo properties measurement mode
(7) Accumulated laser on time display mode
(8) Monitor terminal setting mode
(9) SACD watermark signal quality checking mode : TE
(10) Self test mode
: T0
: T1
: T2
: T3
: T7
: TA
: TB
: TD
: TF
16