ABB AS400 User Manual page 8

1.4.2.1 Connecting the Card
To connect the card to the computer and start the configuration:
1. Plug the RJ-45 end of the supplied serial cable into the Settings port on the card
2. Plug the other end of the serial cable into the serial COM port on the computer.
1.4.2.2 Configuration
To configure the card:
1. Verify that the serial cable (supplied) is connected to the card's Settings port and the computer's COM
port.
2. Open your terminal emulation program (such as HyperTerminal). If you do not have it in your
computer, you can download it from our website:
a. StartàAll ProgramsàAccessoriesàCommunicationsàHyper Terminal
b. Or type HYPERTRM in Windows OS Run Dialog
Figure 5: Card Installation
Figure 6: Card Connection
Figure 7: Hyperterminal path
Figure 8: Hyperterminal through command window
4NWP100446R0001_OPM_ABB_AS400RelayCardPowerValue_EN140226
Modifications reserved
http://www.newavenergy.com/files/hypertrm.zip
Page 9/15 ABB