As400 Relay Card Description; Delivery, Transportation, Positioning And Storage; Receipt Of As400 Card And Visual Inspection; Unpacking - ABB AS400 User Manual

1.1

AS400 Relay Card Description

ABB's AS400 Relay card for PowerValue 11 gives the user the possibility to:
·
Receive UPS internal information by SCI interface protocol;
·
Bridge communication data between a computer and the UPS;
·
Configure five output relay signals;
·
Configure one input signal for UPS shutdown or remote on/off;
·
Configure Dry contact normally opened or normally closed status
·
Configure Dry contact function definition
·
Configure Dry contact active delay time
This document specifies the Serial communication protocol of the AS400 Relay Card and guides the user
throughout the available configurations.
Read carefully all instructions and save this manual for future reference.
1.2

Delivery, Transportation, Positioning and Storage

1.2.1

Receipt of AS400 card and visual inspection

Upon receiving the AS400 Relay Card, carefully examine the packing container. In case of damage, notify
immediately the carrier.
1.2.2

Unpacking

After examining the package, open the carton box and check its contents as following:
- AS400 Relay Card
- 1x M3 Screw
- RJ45 to DB9 cable (for RS232, P/N 720-60679-00)
- This user manual
- Safety Cover
Figure 1: AS400 Relay Card Package Contents
4NWP100446R0001_OPM_ABB_AS400RelayCardPowerValue_EN140226
Modifications reserved
Page 4/15 ABB