Checking The Fluid Level Of The Cab Tilting Pump - DAF XF95 Maintenance Manual

EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
ΞΦ95 series

3.4 CHECKING THE FLUID LEVEL OF THE CAB TILTING PUMP

1. The fluid level must be checked when the
cab is in the driving position.
2. The cock (2) should be in the "tilting back"
position (anti-clockwise).
3. Unscrew the filler plug (1) 3 to 4 turns. Wait
until the overpressure, if any, has left the
reservoir. Remove filler plug (1).
4. Start pumping (maximum 5 pump strokes).
Ensure that the pump lever is in the lowest
position.
5. Check the fluid level. This level should be no
more than 2 cm below the top of the filling
opening. Top up if necessary.
6. Fit the filler plug (1) and hand tighten it.
3.5 CHECKING THE CAB FASTENING
1. Check that all attachment bolts are in place.
2. Visually inspect the attachment of the cab to
the tilting mechanism.
3. Visually inspect the seals and condition of
the tilting mechanism.
Engine, cooling system and fuel system
©
200423
Inspection and adjustment
1
2
5
M201062
K1 01 660
3-3