Place the microphone with its back end into the microphone clamp. Orient the microphone together with the microphone clamp. Connecting the microphone Connect the XLR-3 socket of the microphone cable (optional accessories) to the XLR-3 socket of the microphone. e 906 | 3/8...
• directed towards the center of the batter head many overtones The fundamental tone to overtones ratio can be adjusted via the angle. The most balanced results are obtained at an angle of 30–60°. e 906 | 4/8...
Page 5
120° Adapting the sound characteristics The e 906 features a switchable presence filter which allows to adapt the microphone to the diffe- rent sound requirements and styles (see frequency response). Use a pointed tool such as a small screwdriver to move the 3-position slide switch to the desired position.
Cleaning and maintaining the e 906 Cleaning and maintaining the e 906 CAUTION LIQUIDS CAN DAMAGE THE ELECTRONICS OF THE PRODUCT! Liquids entering the housing of the product can cause a short-circuit and damage the electronics. Keep all liquids away from the product.
Need help?
Do you have a question about the e 906 and is the answer not in the manual?
Questions and answers