Advertisement
UV10 Upright Vacuum
Installation Guide
Assembly Step Two:
Align the tool holder by hand to the handle and main vacuum body. Use a screwdriver and fastener to attach
the tool holder and handle to the main vacuum body. IMPORTANT: FOR THE LID MECHANISM TO WORK PROP-
ERLY, BE SURE TO ALIGN THE TWO HOLES IN THE TOOL HOLDER WITH THE TWO PINS ON THE HINGED LID.
Assembly Step Three:
Connect vacuum hose. Press tabs on plastic cuff on hose end to attach cuff to inlet mounted on hinged lid.
Effective 01/30/13
Questions? (800) 237-7582
Advertisement
