Pullman Holt UV9 Operation & Care Instructions Manual

Pullman Holt UV9 Operation & Care Instructions Manual

Hide thumbs Also See for UV9:

Advertisement

Quick Links

Model UV9
Upright Vacuum Cleaner
This vacuum cleaner is a high quality, precision made
product. All parts used in the manufacturing of this
vacuum cleaner have passed rigid quality control
standards prior to assembly and an "each unit" fi nal
inspection prior to packaging is your assurance of
proper assembly. This vacuum cleaner was protectively
packed to prevent possible damage in transit. Should
damage occur, please notify the transporting carrier
immediately for loss and/or claim.
Using the attachments extends the cleaning
power to your furniture, drapery, walls and
window blinds.
Properly
operated
Pullman-Holt vacuum cleaner will provide high
performance fl oor and carpet cleaning for years
to come.

EXTENSION CORDS:

Machines that have 3 wire cords requiring
grounding must only be used with extension
cords that have 3-prong grounding type plugs
and 3-pole receptacles.
To determine the minimum wire size required,
refer to the chart below:
CAUTION
Never lubricate the vacuum cleaner motor.
The motor bearings are permanently sealed.
This vacuum is intended for indoor use only.
Operation & Care Instructions
Save For Future Reference

IMPORTANT SAFEGUARDS

and
maintained,
Before using an extension cord, inspect it for
loose or exposed wires, damaged insulation and
defective fi tting.
your
Minimum Wire Size (AWG) of Extension Cord
Nameplate
Rating-Amps
25
0-10.0
18
10.1-13.0
16
13.1-15.0
12
NOTE: Warranty claims will be honored ONLY
if handled by an authorized Pullman-Holt
Service Center unless other prior arrangements
have been made with the Pullman-Holt Service
Department.
Total Extension Cord Length (Feet)
50
75
100
125
18
16
16
14
16
14
14
14
12
12
12
12
150
175
200
14
12
12
12
12
12
12
12
-

Advertisement

Table of Contents
loading

Summary of Contents for Pullman Holt UV9

  • Page 1: Important Safeguards

    Operation & Care Instructions Save For Future Reference Model UV9 Upright Vacuum Cleaner This vacuum cleaner is a high quality, precision made product. All parts used in the manufacturing of this vacuum cleaner have passed rigid quality control standards prior to assembly and an ”each unit” fi nal inspection prior to packaging is your assurance of proper assembly.
  • Page 2: Important Safety

    IMPORTANT SAFETY IMPORTANTES MESURES INSTRUCTIONS DE SÉCURITÉ When using an electrical appliance, basic precaution should always be L’utilisation d’un appareil électrique demande certaines précautions: followed, including the following: LIRE TOUTES LES INSTRUCTIONS AVANT READ ALL INSTRUCTIONS DE FAIRE FONCTIONNER CET APPAREIL BEFORE USING THIS VACUUM CLEANER AVERTISSEMENT: WARNING...
  • Page 3: Grounding Instructions

    GROUNDING INSTRUCTIONS VISANT INSTRUCTIONS LA MISE Á LA TERRE Cet appareil doit étre mis à la terre. En cas de défaillance ou de panne This appliance must be grounded. If it should malfunction or breakdown, éventuelles, la mise à la terre fournit au courant un chemin de moindre grounding provides a path of least resistance for electric current to résistance qui réduit le risque de choc électrique.
  • Page 4: Attaching The Handle

    ABOUT THE VACUUM CLEANER Attaching the Handle: 3. Remove soiled fi lter and replace with new one. (Do not wash or reuse.) 1. Remove handle screw. 2. Insert handle into top of housing with handle switch facing Replacing Headlight Bulb: forward.
  • Page 5: Special Features

    Special Features: On-Board Cleaning Tools: This Pullman-Holt vacuum is equipped with state-of-the-art, on- ON/OFF Switch: board cleaning tools including: This Pullman-Holt vacuum is equipped with a convenient handle • Three-piece telescopic wand slide switch to turn power ON and OFF. •...
  • Page 6: Limited Warranty

    LIMITED WARRANTY The vacuum cleaner is warranted for 1 year from the date of purchase as invalidated by improper application and abuse. shown on your distributor’s invoice. Parts not covered under warranty are In NO circumstance should you return a failed unit to the factory. If you power cords, fi...
  • Page 7 NOTES:...
  • Page 8 10702 N 46th Street • Tampa, FL 33617 B000000 (813)971-2223 • fax (813)971-6090 02/11 www.pullman-holt.com...

Table of Contents