Table of Contents
Advertisement
MAINTENANCE
Cleaning the unit
•
Turn off the unit, wait for the fan to stop and unplug from the power socket.
•
Clean the surface with a soft damp cloth.
•
Dry thoroughly with a towel after cleaning.
•
In order to avoid damage, do not wash the machine with water, or let water drip
into the air inlet or outlet.
Cleaning the filter
•
If the filter is covered with dust, the airflow and the performance of the unit will be affected. It is
recommended to check and clean the air filter every 2 weeks.
•
Turn off the unit and remove the filter from the unit.
•
Clean the nano-silver filter only with a vacuum cleaner. (Washing will weaken the germicidal effect
of the filter)
•
Replace the filter in position.
Before storing
•
Turn off the unit, wait for it to stop and unplug from the power socket.
•
Clean and dry the water tank. Leave the unit to drain for approximately one day.
•
Clean the filter and the unit. Cover the unit to prevent it from gathering dust. Store upright in
a cool dry place.
•
Do not expose to direct sunlight.
MAINS PLUG FUSE REPLACEMENT
Fuse Replacement (Class I)
This appliance must be eathed. Remove the fuse cover with a small
flat head screw driver. Take out the fuse and replace with a new fuse
of the same Amp. Replace the fuse cover and push back into place.
8 8
Fuse Cover
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the IG9807 and is the answer not in the manual?
Questions and answers
How do I switch my humidifier on when the on off light is flashing and the timer lights for 1 hour and 2 hours are flashing?
If the on/off light and timer lights for 1 hour and 2 hours are flashing, the unit has likely stopped automatically after 12 hours of continuous use as a safety feature to prevent overheating. To turn the iGenix IG9807 dehumidifier back on, follow these steps:
1. Ensure the unit is plugged in securely.
2. Press the power button to restart the unit.
3. If the unit does not turn on, unplug it from the power source.
4. Wait a few minutes, then plug it back in.
5. Press the power button again to turn the unit on.
If the issue persists, check the troubleshooting guide for additional solutions.
This answer is automatically generated
the on/off light and 4hr lights are flashing and unit is beeping i have unplugged and tried again but to no avail any advice appreciated also is there some way of resetting the unit regards
If the ON/OFF light and 4-hour lights are flashing and the iGenix IG9807 unit is beeping, it indicates that the unit has been running continuously for several hours and has automatically switched off to prevent overheating. This is a normal safety feature.
To reset the unit:
1. Unplug it from the socket.
2. Wait for a short time.
3. Plug it back in and restart the unit.
This answer is automatically generated