Table of Contents
Advertisement
1–2
Introduction
Manual Overview
The Purpose of
this Manual
Supplemental
Manuals
Who Should Read
this Manual
Technical Support
This manual describes the installation and
operation of the Terminator I/O MODBUS
Base Controller (T1K–MODBUS).
The following manuals are essential to the proper use of your Terminator I/O
MODBUS Base Controller.
•
Terminator Installation and I/O Manual part number T1K–INST–M
This manual contains very important information, including a complete
I/O Module Memory Map. The Memory Map is crucial in designing and
implementing a Terminator I/O system.
•
The PLC User Manual (if PLC is used as master).
•
The MODBUS Master manual (if other than PLC is used as master).
If you have a working knowledge of MODBUS networks, and the PLC or PC which
you are using, this manual will help you configure and install your T1K–MODBUS
Base Controller.
We strive to make our manuals the best in the industry and rely on your feedback in
reaching our goal. If you cannot find the solution to your particular application, or, if
for any reason you need additional technical assistance, please call us at
Our technical support team is glad to work with you in answering your questions.
They are available weekdays from 9:00 a.m. to 6:00 p.m. Eastern Time. We also
encourage you to visit our website where you can find technical and nontechnical
information about our products and our company.
770–844–4200.
www.automationdirect.com
Advertisement
Table of Contents
Need help?
Do you have a question about the T1K-MODBUS-M and is the answer not in the manual?
Questions and answers