Signaling Combination Setup; Bandwidth Selection; Frequency Reverse; Talk Around - Midland DBR2500 Owner's Manual

Signaling Combination Setup

This function can improve the level of blocking of irrelevant signals
1� Enter the CHAN MENU, choose the No�6 function
2� Press the [PUSH] button, the menu value in the LCD turns to green
3� Turn the channel knob to choose the desired setting
SQ:You can hear the call when receiving a matching carrrier
CDT:You can hear the call when receiving a matching carrier and CTCSS or DCS
signaling
TONE: You can hear the call when receiving matching carrier + optional signaling�
C&T: You can hear the call when receiving matching carrier + CTCSS/DCS + optional
signaling
C/T: You can hear the call when receiving any matching carrier or CTCSS/DCS or
optional signaling
4� Press the [PUSH] button or the [P3] button to store the setting and exit
This setting is only valid when CTCSS/DCS signaling is added

Bandwidth Selection

Select the desired bandwidth in accordance with different local conditions and laws
1� Enter the CHAN MENU list, choose the No�7 function
2� Press the [PUSH] button, the menu value in the LCD turns to green
3� Turn the channel knob to choose the desired setting
WID: band width is 25k(Wide band)
MID: band width is 20k(Middle band)
NAR: band width is 12�5k(Narrow band)
4� Press the [PUSH] button or the [P3] button to store the setting and exit

Frequency Reverse

With this function on, the transceiver will be able to communicate with a transceiver in
the same network without the use of a repeater�
1� Enter the CHAN MENU list, choose the No�8 function
2� Press the [PUSH] button, the menu value in the LCD turns to green
3� Turn the channel knob to choose the desired setting
ON: Turn on reverse function
OFF: Turn off reverse function
4� Press the [PUSH] button or the [P3] to store the setting and exit
If Frequency Reverse is enabled, the TX and RX frequency will be exchanged. The
CTCSS/DCS signaling will also be exchanged if one is selected on current channel.

Talk Around

1� Enter the CHAN MENU list, choose the No�9 function
2� Press the [PUSH] button, the menu value in the LCD turns to green
page 27
Model DBR2500
midlandusa.com