It is a quality piece of electronic equipment, skillfully constructed with the finest components. The circuitry is all solid-state and mounted on rugged printed circuit boards. Your M-222P is designed for many years of reliable, trouble-free performance. FCC Licensing Information Your M-222P operates on General Mobile Radio Service (GMRS) frequencies and is subject to the Rules and Regulations of the Federal Communications Co-mission (FCC).
Page 3
Control Buttons & Indicators LCD Display...
Installing Batteries Your M-222P radio operates with 3 AA Alkaline batteries. The belt clip should be removed to ease battery installation or removal. To install or remove batteries: 1. With back of radio facing you, gently press the triangular battery latch toward the top of the radio.
Page 5
If the PTT button is pressed continuously for 60 seconds, the radio will emit a warning tone and will stop transmitting. Power Selection: Your M-222P has two transmit power levels. To select the power level on channels 1-7 and 15-22: •...
Page 6
When locked, you will be able to turn the radio off and on, increase or decrease volume, monitor, transmit and send a call tone. To unlock, press for 3 seconds. Call Tone: Your M-222P has 10 different call tones available. To select the call tone: • With the radio on, repeatedly press until CALL appears.
Open the SPK/MIC cover on right side of the radio. • Insert the plug(s) into the SPK/MIC jacks. Intercom: Your M-222P can be used with optional accessories that allow the radio to operate as an intercom system. • Open the INT cover on top of the radio.
LIMITED WARRANTY Midland Radio Corporation will repair or replace, at its option without charge, any Midland FRS/GMRS transceiver which fails due to a defect in material or workmanship within One Year following the initial consumer purchase. This warranty does not apply to water damage, battery leak damage or abuse.
Need help?
Do you have a question about the M-222P and is the answer not in the manual?
Questions and answers