Caring For Your Brewer - Keurig K-1500 Quick Start Manual

Brewer Features
Strong Brew increases the strength and bold taste
of your coffee's flavor. For bolder coffee, press the
STRONG button and select your brew size.
Smart Start heats then brews in one simple process.
No need to wait for the brewer to heat before selecting
your brew size. Power on your brewer, place mug, insert
a K-Cup pod, and lower the handle. Then, select your
®
brew size and press the brew button. The brewer will
heat, then automatically begin brewing.
Auto Off automatically turns your brewer off 2 hours
after the last brew for energy savings. To disable, power
the brewer off while it is still plugged in. Press down on
the STRONG and 10oz buttons at the same time and
hold for 3 seconds until the AUTO OFF Indicator is turned
off. Repeat the same steps to enable the feature.
Commercial Rating ensures that the K-1500™ brewer will
stand-up to the demands of your coffee station. Enjoy
the convenience of a modern touch-button interface, an
industrial (96oz) water reservoir - with easy-grip handle,
and a drainable internal hot water tank.
High Altitude Brewing Instructions*: 1. Power the brewer
off while it is plugged in. 2. Press and hold the STRONG
and 8oz buttons for 3 seconds – both lights will blink 3
times to confirm that the High Altitude Brewing Mode
has been enabled. 3. While holding the brewer bail
up, push down slowly on the K-Cup
until the bottom of the K-Cup
the exit needle.
Disable High Altitude Brewing: 1. Power the brewer off
while it is plugged in. 2. Press and hold the STRONG and
8oz buttons until the lights are no longer illuminated.

Caring for your Brewer

Regular cleaning keeps your brewer running smoothly.
Always be sure to turn off and unplug your brewer
before cleaning. For detailed brewer cleaning
instructions and videos visit commercial.keurig.com
(or keurig.ca/business solutions for Canada). Beyond
these recommended cleaning instructions, this brewer
is not user-serviceable. For service, please refer
to the Warranty section.
Water Reservoir
The water reservoir lid and water reservoir should be
cleaned periodically with a damp, soapy, non-abrasive
cloth. Rinse the reservoir thoroughly after cleaning.
This will ensure that no cleaning solutions remain in
the area, as they may contaminate the water supply.
After rinsing, fill the reservoir with clean water and
return it to the brewer. Do not dry the inside of the
water reservoir with a cloth as lint may remain.
pod in the pod holder
®
pod is punctured by
®