Page 2
GC864-QUAD-C9 Hardware User Guide 1VV0300811 Rev. 0 – 2009-04-22 Disclaimer The information contained in this document is the proprietary information of Telit Communications S.p.A. and its affiliates (“TELIT”). The contents are confidential and any disclosure to persons other than the officers, employees, agents or subcontractors of the owner or licensee of this document, without the prior written consent of Telit, is strictly prohibited.
3.7. SIM H ..................13 XTERNAL OLDER IMPLEMENTATION MOUNTING THE GC864-QUAD-C9 ..................... 14 CONFORMITY ASSESSMENT ISSUES ....................15 SAFETY RECOMMENDATIONS ......................16 LIST OF ACRONYMS .......................... 17 Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 3 of 17...
QUAD-C9 module, which is based on the Telit GE864-QUAD module and, as such, only the added functionalities of the design will be taken into consideration. 1.2. Audience This document is intended for customers integrating the GC864-QUAD-C9 in their project. 1.3. Contact Information, Support For general contact, technical support, to report documentation errors and to order manuals, contact Telit’s Technical Support Center (TTSC) at:...
“Chapter 4: “Mounting the GC864-QUAD-C9” provides some recommendations to follow while mounting the module onto the hosting application. “Chapter 5: “Conformity Assessment Issues”...
GC864-QUAD-C9 Hardware User Guide 1VV0300811 Rev. 0 – 2009-04-22 1.6. Related documents a. GE864 and GC864 Product description, 80273ST10008a b. GE864 Hardware User Guide, 1vv0300694 c. Telit’s GSM/GPRS Family Software User Guide, 1vv0300784 d. AT Commands Reference Guide, 80000ST10025a e. SIM Holder Design Guides, 80000NT10001a Audio Settings Application Note, 80000NT10007a 1.7.
ZIF connector interface and extra features described in the following paragraphs. NOTICE: The GC864-QUAD-C9 provides the same characteristics of the GE864-QUAD, as far as Quad-Band EGSM 850/900/1800/1900Mhz GSM and GPRS Class 10 technologies support and over the air firmware update by means of Premium FOTA Management.
GC864-QUAD-C9 Hardware User Guide 1VV0300811 Rev. 0 – 2009-04-22 System characteristics 3.1. Power Supply Requirements The power supply circuitry and board layout are a very important part in the full product design and they strongly reflect on the product overall performances.
GC864-QUAD-C9 Hardware User Guide 1VV0300811 Rev. 0 – 2009-04-22 3.2. GC864-QUAD-C9 Mechanical Dimensions The Telit GC864-QUAD-C9 module overall dimensions are the following: Length 54,5 mm Width 36 mm Thickness 3.7 mm Figure 2 Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved.
GC864-QUAD-C9 Hardware User Guide 1VV0300811 Rev. 0 – 2009-04-22 3.3. GC864-QUAD-C9 module connections 3.3.1. ZIF Connector Pin-Out The following table (table 2) describes the pin-out configuration for the ZIF connector. Pin Number Function In/Out Pin Number Function In/Out VBATT Power...
GC864-QUAD-C9 Hardware User Guide 1VV0300811 Rev. 0 – 2009-04-22 3.3.2. STAT LED The STAT LED pin is used to display information about the network availability and call status. It usually needs and external transistor to drive an external LED, as...
GC864-QUAD-C9 Hardware User Guide 1VV0300811 Rev. 0 – 2009-04-22 3.4. Connectivity to the ZIF interface The connection to the ZIF interface can be done via an appropriate 40 contacts flat flex cable. WARNING: Be sure that the flex cable fits into the design of the application and that pin 1 and 40 of the cable are connected to the VBATT and MIC_MT- signals respectively.
GC864-QUAD-C9 Hardware User Guide 1VV0300811 Rev. 0 – 2009-04-22 3.5. Serial Ports 3.5.1. UART connectivity – serial port Please refer to the GE864 Hardware User Guide (1vv0300694) for details about UART connectivity. 3.6. Audio section overview Please refer to the related Audio Settings Application Note (80000NT10007a) for details about the audio hardware setup of this module.
GC864-QUAD-C9 Hardware User Guide 1VV0300811 Rev. 0 – 2009-04-22 Mounting the GC864-QUAD-C9 The module has to be firmly attached to the host application in order to work properly and avoid any source of future issues. This is granted by the three mounting holes provided by the C9 and the use of M1.6 or M1.8 screws plus suitable washers.
GC864-QUAD-C9 Hardware User Guide 1VV0300811 Rev. 0 – 2009-04-22 Conformity assessment issues Please refer to the GE864 Product Description (80273ST10008a) for the conformity assessments of this Telit module. Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved.
GC864-QUAD-C9 Hardware User Guide 1VV0300811 Rev. 0 – 2009-04-22 Safety recommendations Please refer to the GE864 Product Description (80273ST10008a) for information about safety recommendations regarding this Telit module. Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved.
GC864-QUAD-C9 Hardware User Guide 1VV0300811 Rev. 0 – 2009-04-22 List of acronyms Data Set Ready GPRS General Radio Packet Service Global System for Mobile communication Hands Free Mobile Terminated Printed Circuit Board Radio Frequency Ring Indicator Ready To Send Subscriber Identity Module...
Need help?
Do you have a question about the GC864-QUAD-C9 and is the answer not in the manual?
Questions and answers