Call Waiting; Call Barring; Hide; Call Time Minute Reminder - D-Link DWR-720P User Manual

1. Call forwarding unconditional:
This setting redirects all incoming calls to another phone number.
To Enable this function, press [Select] ‐> [Activate]. Choose between [Divert to voicemail] or [Divert to number].
If [Divert to voicemail] is selected, make sure the correct settings are configured per the SIM card's service provider
under [Line number]. If [Divert to number] is selected, enter the number which you wish to divert the call to, or
press [Contacts] to select from an existing number.
To Disable this function, press [Select] ‐> [Off].
To check if this function has been activated, by press [Select] ‐> [Check Status].
Call forwarding on busy:
2.
This setting redirects all incoming calls to another phone number if the phone line
is busy. Phone line can be busy if the number is calling out, you're not in a service area or you're using Call Waiting
and already have two callers on the line.
To Enable this function, press [Select] ‐> [Activate]. You can choose between [Divert to voicemail] or [Divert to
number]. If [Divert to voicemail] is selected, make sure the correct settings are configured per the SIM card's service
provider under [Line number].
If [Divert to number] is selected, enter the number which you wish to divert the call to, or press [Contacts] to select
from an existing number.
To Disable this function, press [Select] ‐> [Off].
To check if this function has been activated, by press [Select] ‐> [Check Status].
Call forwarding on no reply:
3.
This setting redirects all incoming calls to another phone number if the call
isn't answered within a specified number of rings.
To Enable this function, press [Select] ‐> [Activate]. Choose between [Divert to voicemail] or [Divert to number].
If [Divert to voicemail] is selected, make sure the correct settings are configured per the SIM card's service provider
under [Line number]. If [Divert to number] is selected, enter the number which you wish to divert the call to, or
press [Contacts] to select from an existing number. For both options, you can set the no reply time to 5, 10, 15, 20,
25 and 30 seconds.
To Disable this function, press [Select] ‐> [Off].
To check if this function has been activated, by press [Select] ‐> [Check Status].
Divert if unreachable:
4. This redirects all incoming calls to another phone number if the phone loses
registration for any reason.
To Enable this function, press [Select] ‐> [Activate]. Choose between [Divert to voicemail] or [Divert to number].
If [Divert to voicemail] is selected, make sure the correct settings are configured per the SIM card's service provider
under [Line number]. If [Divert to number] is selected, enter the number which you wish to divert the call to, or
press [Contacts] to select from an existing number.
To Disable this function, press [Select] ‐> [Off].
To check if this function has been activated, by press [Select] ‐> [Check Status].
Cancel all diverts:
5. Press to cancel all existing call forwarding/diverts.
6.3.4 Call waiting
Call waiting allows you to take a second call without disconnecting the first.
To activate call waiting, Press ✲43# on standby mode to activate the service on Telkom.
Thereafter, you can [Activate], [Cancel], [Check status] on the call waiting interface.
Call barring lets you stop certain types of calls being made from your phone. This feature is
network independent. Please contact your network operator for setup of this feature. Available
options are:
1. All Outgoing Calls: This will block your phone from making all calls (except emergency & toll‐free calls).
2. All Received Calls: This will block your phone from receiving any calls.
3. Receive Calls in Roaming: This will block your phone from receiving any calls while in roaming status.
4. International Calls: This will block your phone from making all international calls.
5. Make Calls in Roaming: This will block your phone from making any calls while in roaming status.
6. Cancel all barring: Cancel all configured barring.
7. Change Password: Change the password set for call barring.
You can set the CLI of the telephone to display: [Hide ID], [Display own ID] or [Display ID by
network].
Enable or disable this function. It allows you to set a time limit reminder with a warning tone
during the call. You can set the reminder at 50, 55, 60 seconds or off.
Enable or disable this function. This is a service feature that when you call and get no answer or
busy tone, the phone will automatically redial or ask if you want to redial. You may press [Cancel]
when the phone is redialling.
You can enable or disable Any‐Key answer function. With any‐key answer, you will be able to
answer the phone by picking up the handset or by pressing any key on the phone for hands free.
21
6.3.5 Call barring
6.3.6 Hide ID
6.3.7 Call time minute reminder
6.3.8 Auto redial
6.3.9 Answer/Reject mode
22