CAL Controls 3300 Operating Manual page 26

LEVEL 4
Access to level 4 is gained through
Press and hold and for 10 seconds.
Enter level 4 at Lock , release
will alternate and nonE
LOCK
Program security using Lock
Select from three Lock options:
Press and hold , press to index.
LEV.3
locks level 3 and 4 only- Technical Functions.
LEV.2 locks levels 2, 3 and 4 only - Configuration and
Technical Functions.
ALL locks all functions (unrestricted LEVL, VEr,
, SP.LK )
TECH
Note: Locked functions and options may be read.
IMPORTANT NOTE FOR OEM's: For safety and to protect settings from tampering
USE THE SOFTWARE SECURITY LOCK.... THEN REMOVE THIS SECTION.
in level 3.
VER
and together. Display
Press to access following functions
[Auto] StAY
PROG
Program mode auto-exit switch
Auto-exit returns display to normal if 60 seconds of key
inactivity, select StAY to disable
[oFF] on
NO.AL
Disable SP2 alarm annunciator -AL-
Select on to disable -AL-
dir 1 to 32
DIS.S
Display sensitivity
dir = direct display of input
1 = maximum, 32 = minimum sensitivity
0.1 to 1.0 [0.5]
DER.S
Derivative sensitivity
[6]
21