Assigning Text Description For A Transmitter - EMS 7940 IRIS+ Installation And Programming Instructions

EMS 7000 IRIS +

11. Assigning Text Description For A Transmitter

11.1 Repeat steps 10.1 to 10.4.
11.2 Press
displays:
11.3 Press the "1" button and the
screen will change to display:
11.4 Press " " and the screen will
now display:
11.5 Press the "1" button and the
screen will change to display:
11.6 Press
displays:
11.7 Press the "1" button and the
screen will display:
11.8 Generate
activating
onboard tamper switch and the
screen will change to display:
11.9 After a short period of time the
screen will display:
11.10
" " until
" " until
a transmission
the
Once again generate
transmission using the tamper
switch, the screen will change
to display: The current selected
character is shown above the
centre bar.
the screen
2=Help
2=Help
2=Help
2=Help
the screen
2=Help
by
transmitters
a
2 = Help |
18
| Time and Date |
> Radio Setup <
| Output Setup
16: 37
| ** Radio Setup ** |
> Add Transmitter <
| Txer Details
16:37
| Add Transmitter |
> Txer Details <
| Set Radio Rules |
16:37
| - Txer Details - |
> Name by Number <
| Name by Tx
16:37
| Name by Number |
> Name by Tx
| View Names
16:37
Operate Transmitter
NOW or press
Escape to cancel
16:38
Release all buttons
NOW
16:38
Operate Transmitter
Again or press
Escape to cancel
16:38
|
|
4< IJKL M NOPQR >6
16:38
7940 ENGINEERS GUIDE v2.2 – 13/04/10
|
|
|
<
|
|
|