Mitsubishi Electric MUFZ-KJ-NAHZ Series Service Manual page 19

Split-type air conditioners, indoor/outdoor unit
Table of Contents

Advertisement

Set temperature for SLEEP operation.
For about 30 minutes after SLEEP (
when the SLEEP button is pressed. It will change to the set temperature for SLEEP operation in about 30 minutes.
Pressing SLEEP (
NOTE:
• ON/OFF timer is available during SLEEP operation.
• When a preset ON time for the weekly timer arrives during SLEEP operation, the weekly timer operation has priority. SLEEP
operation will be cancelled, and the operation set on the weekly timer will start.
2. How to cancel operation
• Press SLEEP (
• The operation returns to the previous settings.
• SLEEP operation is also cancelled when the FAN button is pressed or the operation mode is changed.
NOTE: SLEEP operation and SMART SET operation cannot be set at same time.
8-10. SMART SET ( ) OPERATION
1. How to set SMART SET operation
(1) Press STOP/OPERATE (OFF/ON) button.
(2) Select COOL, HEAT or ECONO COOL mode.
(3) Press SMART SET button.
(4) Set the temperature, fan speed, and air ow direction for SMART SET operation.
NOTE:
• SMART SET operation cannot be selected during DRY or AUTO mode operation.
• The setting range of HEAT mode SMART SET operation is 50°F (10°C) and 61 - 88°F (16 - 31°C).
• 2 groups of setting can be saved. (One for COOL/ECONO COOL, one for HEAT)
• SMART SET operation and the weekly timer operation cannot be used together.
• SMART SET operation and SLEEP operation cannot be set at the same time.
2. How to cancel operation
• Press SMART SET button again.
• SMART SET operation can also be cancelled by pressing OPERATION SELECT button to change the operation mode.
The same setting is selected from the next time by simply pressing SMART SET button.
) button is pressed, the set temperature remains as set for the operation running
) button again returns the operation to the previous settings.
is
pressed.
Set
temperature for
the operation
before SLEEP
operation
For about 30
minutes
) button again.
is
pressed.
Set temperature for
Set temperature for
the operation before
SLEEP operation
SLEEP operation
19

Advertisement

Table of Contents
loading

Table of Contents