Mitsubishi Electric MUFZ-KJ-NAHZ Series Service Manual page 17

8-8. WEEKLY TIMER OPERATION
• A maximum of 4 ON or OFF timers can be set for individual days of the week.
• A maximum of 28 ON or OFF timers can be set for a week.
NOTE:
• The simple ON/OFF timer setting is available while the weekly timer is on. In this case, the ON/OFF timer has priority over the
weekly timer, the weekly timer operation will start again after the simple ON/OFF timer is complete.
• When the weekly timer is set, temperature cannot be set to 50°F (10°C).
• The weekly timer operation and SMART SET operation cannot be used together.
1. How to set the weekly timer
* Make sure that the current time and day are set correctly.
(1) Press button to enter the weekly timer setting mode.
(2) Press and buttons to select setting day and number
Pressing selects the day of
the week to be set.
* All days can be selected.
(3) Press , , and
Pressing
selects ON/OFF timer.
Pressing
adjusts the time.
Pressing
deletes timer setting.
* Hold down the button to change the time quickly.
* The temperature can be set between 61°F and 88°F (16°C and 31°C) at weekly timer.
Press and buttons to continue setting the timer for other days and/or numbers.
E.g. : Runs at 75°F (24°C) from waking up to leaving home,
and runs at 81°F (27°C) from getting home to going to
bed on weekdays.
Runs at 81°F (27°C) from waking up late to going bed
early on weekends.
75°F (24°C)
AM 6:00 AM 8:30
PM 8:00
* blinks.
E.g. : [Mon Tue ... Sun]
and [1] are selected.
Pressing selects
the setting number.
buttons to set ON/OFF, time, and temperature.
E.g. : [ON], [AM 6:00] and
[75°F (24°C)] are
selected.
Pressing
adjusts the tem-
perature.
81°F (27°C)
PM 5:30 PM 10:00
81°F (27°C)
PM 9:00
.
17