Mitsubishi Electric MUFZ-KJ-NAHZ Series Service Manual page 18

(4) Press button to complete and transmit the weekly timer setting.
NOTE:
• Press button to transmit the setting information of weekly timer to the indoor unit. Point the remote controller toward the
indoor unit for 3 seconds.
• When setting the timer for more than one day of the week or one number,
setting. Press button once after all the settings are complete. All the weekly timer settings will be saved.
• Press button to enter the weekly timer setting mode, and press and hold
timer settings. Point the remote controller toward the indoor unit.
(5) Press button to turn the weekly timer ON. (
•When the weekly timer is ON, the day of the week whose timer setting is complete, will light.
Press button again to turn the weekly timer OFF. (
NOTE:
The saved settings will not be cleared when the weekly timer is turned OFF.
2. Checking weekly timer setting 2. Checking weekly timer setting
(1) Press button to enter the weekly timer setting mode.
* blinks.
(2) Press or buttons to view the setting of the particular day or number.
(3) Press button to exit the weekly timer setting.
NOTE:
When all days of the week are selected to view the settings and a different setting is included among them,
displayed.
8-9. SLEEP ( ) OPERATION
1. How to set SLEEP operation
(1) Press STOP/OPERATE (OFF/ON) button.
(2) Select COOL, DRY, HEAT or FAN mode.
(3) Press SLEEP (
(4) PRESS TEMPERATURE buttons [
operation.
Fan speed:
Horizontal vane:
Operation indicator lamp: Dimly lit
• Once the above procedure is completed, the settings will be saved.
• After the settings are saved, a single push of SLEEP (
same settings every time.
• Temperature for SLEEP operation cannot be set during DRY or FAN mode.
* which was blink-
ing goes out, and the
current time will be
displayed.
lights.)
) button.
(Increase) and
AUTO
Position set on the remote controller
button does not have to be pressed per each
button for 5 seconds to erase all weekly
goes out.)
(Decrease) ] to set the temperature of SLEEP
) button during operation activates SLEEP operation with the
18
will be