EFI IQ-501 How To Use Manual page 13

How-To: Using the IQ-501 with the Fiery server
10. Select IQ-501 from the Instrument pull-down.
11. Select an appropriate size from the Chart size
pull-down. Ensure that it matches the media
selection (next step).
11 .Optionally select warmup pages.
A
12. Click Print.
13. The Fiery Measure job properties window
opens.
14. Select the Media tab.
15. Select the media attributes for the media you
wish to profile, ensuring that the media size
matches the chart size (previous step).
16. Click OK to print and measure the calibration
chart.
Note: If you chose the G7 gray balance
calibration target option in step 9, additional
steps and targets are generated here.
Once complete the process continues as
documented.
13