Explanation Of Commands - FUTABA FDP03TJ010 Instruction Manual

Ver.1.0

9.3.3 Explanation of commands

ARG (Show all registers)
[Format]
ARG
[Response]
List of register settings (REG00 to REG26)
N0: Command error
[Function]
- The FDP03 returns all register settings by this command.
- The register settings are shown in hexadecimal code.
[Examples of use]
>@ARG<Cr><Lf>
<REG00: 00H<Cr><Lf>
<REG01: F0H<Cr><Lf>
・
・
・
<REG26: 01H<Cr><Lf>
BCL (Clear transmission and reception buffers)
[Format]
BCL
[Response]
P0: Normal end
N0: Command error
[Function]
- The transmission and reception buffer is cleared by this command.
[Examples of use]
>@BCL<Cr><Lf>
<P0<Cr><Lf>
If this command is executed during data transmission in broadcast transmission
mode, newly in coming data might be stored and output after the buffer is
cleared.
Also, serial data output is stopped when this command is executed during serial
data output.
30