Dsp Fail Fault; Symptoms; Possible Causes; Troubleshooting - Samsung Ubigate iBG2016 Troubleshooting Manual

DSP fail fault

This fault occurs when there is an error in the process of initializing the DSP
card, it might occur in the initiation of the system. When a fault occurs the
system cannot be used as voice gateway. When the iBG2016 system fails to
initialize DSP chipset, you have to reboot the system.

Symptoms

On the iBG2016 system, following event will be occurred.
#Feb 09 12:00:47 emergency
initialization fails RAISE

Possible Causes

The iBG2016 system fails to initialize DSP chipset.

Troubleshooting

Reboot iBG2016 system fater removing DSP chipset from slot 0 MPU_A.
© SAMSUNG Electronics Co., Ltd.
Ubigate iBG2016 TroubleShooting Manual/Ed.00
EVENT DSP module
7