Siemens SINAMICS S120 Getting Started page 16

Creating a drive project
3.1 Setting the communications interface
3. In the dropdown list "Access Point of the Application", select entry
4. Click on button "Properties" in order to set the interface.
5. Set the address to "0".
6. Click on "OK".
16
"DRIVES (STARTER, SCOUT) --> CP5511(PROFIBUS)".
The "Properties - CP5511(PROFIBUS)" window opens as well.
A data transmission rate of 1.5 Mbit/s or above is recommended.
The "Properties" window closes.
Getting Started, 11/2009, 6SL3097-4AG00-0BP0
Getting Started