8
156
Disengage inner trim panel 2.
In this process, take care not
to strain cable 4 for the power
socket.
z
Installing inboard cover
Install inner trim panel 2. In this
process, note cable 4.
Align the inner trim panel and
seat it in fairing top section 3.
Install screws 1.
Jump-starting
CAUTION
Touching live parts of the ig-
nition system when the en-
gine is running.
Electric shock
Do not touch parts of the igni-
tion system when the engine is
running.
ATTENTION
Excessive current flowing
when the motorcycle is
jump-started
Wiring smoulders/ignites or dam-
age to the on-board electronics
If the motorcycle has to be
jump-started connect the leads
to the battery terminals; never
attempt to jump-start the en-
gine by connecting leads to the
on-board socket.