BMW S 1000 XR Rider's Manual page 95

Compression stage, ba-
sic setting, front
Position 1 (comfortable setting
with rider 85 kg)
Position 3 (normal setting with
rider 85 kg)
Position 7 (sports setting with
rider 85 kg)
Adjust the rebound-stage
damping for front wheel
Adjust rebound-stage damping
by turning adjusting screw 1
and reading the yellow scale on
the right fork leg.
To increase damping: Use the
tool from the on-board kit to
turn the adjusting screw in the
appropriate direction so that
mark 2 points to a higher read-
ing on the scale.
To reduce damping: Use the
tool from the on-board kit to
turn the adjusting screw in the
appropriate direction so that
mark 2 points to a lower read-
ing on the scale.
Rebound stage, basic
setting, front
Position 1 (comfortable setting
with rider 85 kg)
Position 3 (normal setting with
rider 85 kg)
Position 7 (sports setting with
rider 85 kg)
Factory default settings,
front wheel
Reset the factory defaults as
stated below.
Factory default settings
for compression/rebound
stages, front
Position 5
Adjusting rebound-stage
damping for rear wheel
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
5
93
z