Control memory data are deleted or initialized according to the items listed below by
using Service Mode #8 CLEAR.
Before performing this procedure, be sure to print a backup data list.
ROM information display (#9 ROM)
Shows the image processor PCB's ROM DIMM management information (version
no., checksum, etc.) on the display.
10. CS SET (mirror mount initialization setting)
When this item is set, the mirror mount moves to the position set when shipped.
Data entered in User data 2. TEL # REGISTRATION
Data that are entered in User data 1. DATA REGISTRATION and data
entered in Service mode settings #1-#3. However, the data in the
FILE SETTINGS of User data 1. DATA REGISTRATION are not delet-
ed or initialized.
User data, data in service mode items #6, #7
Data in service mode settings #4A, #4B
Data in service mode setting #4C
Management data system dump list data
Management data activity management report data
Print counter data from management data system dump
All user data, service mode setting items, management data and
image data except service mode setting #5 and the print counter
from management data system dump
CHAPTER 4 SERVICE MODE