Status 3 (misprint status in detail)
Bit
Meaning
0
Parity bit (odd number)
1
Reserved
2
Reserved
3
Paper size error
4
Paper feeding fault
5
Reserved
6
BD signal trouble
7
Reserved
[Bit 3]
When the registration clutch is turned off then on again and the recording paper leading
edge sensor is ON, this becomes 1.
[Bit 4]
When the set or specified paper size is judged to be different from the paper feeding
into the printer, this becomes 1.
[Bit 6]
When there is a fault in the laser scanning mechanism and the BD signal is not output
at the prescribed timing (cycle and signal width), this becomes 1.
Abnormal
Abnormal
Out of order
Table 4-28
CHAPTER 4 SERVICE MODE
1
0
Normal
Normal
Normal
4-77