ZXSDR R8882 L200 User Manual
Figure 3-41 PIMDC Grounding Bar Connection
3. Attach the label on the grounding cable.
4. Measure the grounding resistance and make sure it is less than 5 ohms.
– End of Steps –
2.4.5 Connecting Fiber Between eBBU and eRRU
Steps
1. Remove the protection cap from the optical fiber, and then detach the outer protection
cover
2. Remove two white covers, as shown in
SJ-20110104194923-001|2011-1-15(R1.0)
Figure
3-43.
3-30
ZTE Proprietary and Confidential