Zte ZXSDR R8882 L708 User Manual page 34

ZXSDR R8882 L200 User Manual
Figure 3-27 Fasten the Vertical Shaft and the Cover Plate
c. Install the slanted rack by using the M5x16 screw, as shown in Figure 3-28.
Figure 3-28 Install the Slanted Rack
2. Drill holes
a. According to the engineering design drawing, determine the installation position
of the gantry and mark installation holes by using the marking pen.Figure 3-29
shows the installation holes of the gantry.
3-20
SJ-20110104194923-001|2011-1-15(R1.0) ZTE Proprietary and Confidential