Zte ZXSDR R8882 L708 User Manual page 15

Chapter 2
Product Installation
Table of Contents
Safety Description ......................................................................................................3-
1
Device Unpacking and Inspection...............................................................................3-5
Device Installation ......................................................................................................3-
6
Cables Connection ...................................................................................................3-
23
2.1 Safety Description
2.1.1 Safety Specifications Introduction
In order to avoid accidents, before installing or maintaining the ZXSDR R8882 L708, please
read this manual carefully for safety issues. If there are any local safety specifications, use
the safety specifications described in this manual as a supplement. If there is any conflict
between them, please follow the local safety specifications.
The personnel who install or maintain the ZXSDR R8882 L708 must be equipped
with knowledge of safety operation, technical training, correct knowledge of equipment
operation and maintenance, and corresponding qualifications.
When installing or maintaining the ZXSDR R8882 L708, the operator must follow the
precautions of the equipment and special instructions provided by ZTE CORPORATION.
Furthermore, the security issues listed in this manual are only friendly reminders by
ZTE CORPORATION from safety point of view. ZTE is not responsible for any accident
caused by violations of general safety operating requirements, or by violations of the
design, production and use of equipment safety standards.
2.1.2 Safety Symbols
Common safety symbols are shown in
user with safety matters when they maintain the equipment.
Table 3-1 Symbol type and meanings
Symbols
SJ-20110104194923-001|2011-1-15(R1.0)
Table 3-1. These symbols are used to remind the
Meanings
No Touch Sign: DO NOT touch
General Warning Sign: General security issues
ZTE Proprietary and Confidential