Table of Contents
Advertisement
Appendix B: Battery Sensor Configuration Utility
8. Review the information, and click Install to start the installation.
9. Click Finish when the completion window appears.
First Time Running after Install
Note
Be sure to install the software before plugging the USB programmer into the USB
port of your computer.
1. After installing the software, insert the USB Programmer into the USB port of your computer.
2. Start the software by double clicking on the following icon on the desktop.
The Sensor Configuration window opens, and the left frame of the status bar (the very lower
left of the program window) should say "Found USB Programmer" as shown in Figure 33.
User Interface
The SNS Sensor Configuration has four main tabs: Setup, Status, Tools, and Info. The Setup tab
contains subtabs for configuring the sensor for the network and reporting parameters. For more on
the Setup tab, see Configure Battery-powered Sensors with the Sensor Configuration Utility on
page 39. When selecting the Status and Info tabs, the utility automatically extracts the information
Primex Wireless, Inc.
Figure 32: USB Port Icon for Sensor Configuration
Figure 33: Sensor Configuration Window after Installation
SNS™ Temperature and Humidity Sensors Installation Guide
User Interface
60
Advertisement
Table of Contents
