Table of Contents
Advertisement
Features of SNS Battery-powered Sensor Devices
Batteries
SNS battery-powered sensors use two AA batteries located inside the sensor (Model SNS2TNS-2,
Figure 4; Model SNS2TPH-2, Figure 12) or in an externally accessible battery compartment (Model
SNS2TPS-2, Figure 5).
Programming Cable Connection
Battery-powered sensor devices come with a USB programming cable for use when configuring the
sensor device. The standard USB connector connects to the computer that is running the
configuration software utility. The other end of the programming cable connects to the sensor
device's programming connection. For information on configuring sensors, see Configure Sensors
for the Network on page 25.
As shown in Figure 4, Figure 6, and Figure 7, the location of the programming cable connection
depends on the sensor model.
Primex Wireless, Inc.
Figure 5: On/Off Switch Model SNS2TPS-2
Figure 6: Side of Model SNS2THS-2
SNS™ Temperature and Humidity Sensors Installation Guide
Batteries
19
Advertisement
Table of Contents
